|
MC23 MINICENTER The MC 23 model is the most compact among the various models that constitute the MC family. The fixed-gantry frame is made of top-grade cast iron and steel to ensure maximum stiffness also when machining steel. Traversing is driven by precisionground ball screws; the 3 axes are simultaneously controlled to ensure precision milling of 2D and complex, 3D designs. The exclusive 9-tools automatic changer is fitted with an air jet to blow the toolholder taper clean. The control unit has panel controls for adjusting spindle and axis speed and coolant flow. It is prearranged for the 4th (indexing).
This sophisticated yet rugged and simple machine has a number of uses: marking and engraving, making small dies and electrodes, sheet-metal blanking and punching, plate making, etc. Now it allows also to execute tapping operations.
The difference between the MC 23 R model and the MC 23 lays on the fact that the MC 23 R has an increased upright clearance of 90mm. That allows providing the machine with a clamping device for pieces which have a considerable vertical length, whilst keeping its precision features and reliability which characterise this model. This increased clearance doesn’t involve an increase of spindle travel which remains at 75mm. In case of setting up universal divider we remind you that with this model it is possible to carry out object elaboration of up to 230mm diameter, instead of the 140mm from the standard version.
TECHNICAL SPECIFICATIONS Machining area X Y Z - 300x240x75 mm
Working table - 375x300 mm
Dimensions (LxPxH) - 550x600x750 mm
Weight - 180 kg
Linear Motion System - Anti-backlash ballscrews 25 mm diameter
Interpolation - Full 3-axis simultaneous movement
Tool change - Automatic with 9 places
Avarage tool-change time - 5s
Clearance between uprights - 490 mm MC53 MINICENTER 
A perfect balance of stiffness, compactness and a large machining area, allow running a broad range of jobs: machining tiny, a few mm-thick components, cutting sheet brass and aluminium, engraving plates, drilling industrial panels, milling dies and small copper electrodes, etc. This small machining centre is user-friendly and easily set up; tool change is fast and machining precision high. Like any other BIEMMEPI minicentre it is thoroughly protected against swarf and fitted with operator’s guards, which do not impede setting up or checking the several machining stages.
Just like the MC 23 , for the MC 53 model BIEMMEPI has manufactured an incremented version to give 90 mm of vertical clearance more than the standard model. This version, also keeps the features of robustness and precision which differentiates it from the standard version and more freedom to the piece clamping equipment installation, offering an upright clearance of 90 mm. The 75 mm Z axis travel remains the same Z.
TECHNICAL SPECIFICATIONS
Machining area X Y Z - 500x300x75 mm Working table - 530x380 mm Dimensions (LxPxH) - 1100x600x750 mm Weight - 230 kg Linear Motion System - Anti-backlash ballscrews 25 mm diameter Interpolation - Full 3-axis simultaneous movement Tool change - Automatic with 9 places Avarage tool-change time - 5s Clearance between uprights - 490 mm
MC64 MINICENTER
The Series-64 have 650x450 mm machining area and it is equipped with an automatic 13-tools changer. Three simultaneous axes, strong fixed-gantry frame made with topgrade materials, precision-ground ball screws are the main features of Series 64. Its operating range makes this machine suitable to meet virtually any requirement of a qualified engraver: it will mill aluminium and brass 3-4 mm deep in one pass only, to cut out large letters for posters and signs, cut large panels and machine small dies and punches with remarkable precision. It uses reliable, proven and properly dimensioned mechanical components so as to guarantee long life. When equipped with BMPCAD, Biemmepi’s powerful 2D and 3D milling software, it turns into a unique facility of unsurpassed versatility and flexibility.
TECHNICAL SPECIFICATIONS
Machining area X Y Z - 650x450x75 mm Working table - 680x530 mm Dimensions (LxPxH) - 1375x765x750 mm Weight - 275 kg Linear Motion System - Anti-backlash ballscrews 25 mm diameter Interpolation - Full 3-axis simultaneous movement Tool change - Automatic with 13 places Avarage tool-change time - 5s Clearance between uprights - 630 mm
|
Perez Camps RSS
Machines 
Tel. +34 93 637 66 22 
