Our website uses its own and third parties cookies for a high level of user-friendliness. If you continue to browse and  use this website we will assume that you agree with the policies.

VINIL LASER FOR ENGRAVING

Back
vinil_laser
LaserLaser
Outdoor useOutdoor use

VINIL LASER FOR ENGRAVING

VINIL LASER is a high quality multi-layered polyurethane film on an aqueous base, having a good opacity and high elasticity. The carrier material is paper. 

It has been specially designed to be not only laser cut but also welded. that starts already when establishing the motif, as pixel graphics need not be vectorised anymore. VINIL LASER is suitable for cotton, polyester and mixed fibres, however, less suitable for nylon and other coated textiles. 

The necessary settings of the laser way depending on the device and colour used. A good starting point for a 25W laser is 600 dpi, 65% speed and for black colour, red and navy 62% power, all other colors 55% power. The cut and welded motifs are ironed onto textiles for 17 seconds and 165ºC, the carrier can then be removed in warm condition. 

More information

Specifications

Dimensions: DIN A4 / DIN A3*

Roll 50 cm x 25m* (Available upon request)

Transfer conditions:

- Temp: 165ºC
- Time: 17 seg
- Preassure: medium-high
- Wash: Wash resistance 60ºC
- Textiles: Cotton, polyester and mixed fibers. 

Layer on layer is possible. 

References

C1299

C1299

Black

C1298

C1298

White

C1300

C1300

Yellow

C1302

C1302

Blue

C1301

C1301

Red

C1303

C1303

Orange

C1304

C1304

Green

C1305

C1305

Dark Blue